Setup > Adapter Usage - Agilent Technologies N4413A User Manual

Menu Reference
Setup Menu
Select the Calibration Instruction Set allows tailoring of the sequence for presenting
calibration standards to the system for the best match with the measurement environment.
Setup > Adapter Usage...
Pull down Setup > Adapter Usage... to open the THRU ADAPTER USAGE dialog box and
setup adapters for use in calibrating the system.
Click the Select Thru Configuration choice that best minimizes the amount of cable
bending during the calibration and the measurement. The choices are:
• Config 1 - uses four paths (1-2, 3-4, 1-4, 3-2)
• Config 2 - uses four paths (1-2, 3-4, 1-3, 2-4)
• Config 3 - uses all six paths (1-2, 3-4, 1-3, 2-4, 1-4, 3-2)
Chapter 5 113