Agilent Technologies N4413A User Manual page 176

Instrument Information
Front and Rear Panels
N4413A Rear Panel
ID Rear Panel
Number Feature
1 BIAS 1
PORT 1
2 BIAS 1
FUSE 1/2A
3 BIAS 3
PORT 3
4 BIAS 3
FUSE 1/2A
5 BUS
ADDRESS
6 IEEE-488
7 BIAS 4
FUSE 1/2A
166
Feature Description
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
Switch that is used to set the GPIB address. Refer to
the GPIB Addresses" on page 38
24-pin IEEE-488/PCB (f) connector. The GPIB is the
communication bus with the PC and the network analyzer.
Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
for further information.
Chapter 7
"To Set