The Main Screen - Agilent Technologies N4413A User Manual

User Interface

The Main Screen

The Main Screen
The opening screen of the N4425A Balanced Measurement Software is shown
Initially, the system displays a thumbnail-sized single-ended (unbalanced) four-port
S-parameter matrix. A mixed-mode (balanced) four-port S-parameter matrix can also be
displayed (select Data > Transforms > 2 Balanced Ports or Data > Transforms > 2
Single-Ended, 1 Balanced Port).
User-defined displays, combining measured data with math functions, can be easily created.
See "How to Set Up User-Defined Displays" on page
The number of thumbnail S-parameters displayed is dependent on the port selection that you
make in the Setup menu.
• For the 4-port measurement selection, 16 S-parameter thumbnails are displayed.
• For the 3-port measurement selection, 9 S-parameter thumbnails are displayed.
• For the 2-port measurement selections, 4 S-parameter thumbnails are displayed.
For each display, the plot or chart type, scaling, and other parameters can be assigned
individually. See "Individual Measurement Screens" on page
Display parameters can also be easily copied from one display to another.
• To copy the display parameters, simply move the cursor over the display with the desired
formatting, and left-click the mouse while holding the Shift key.
• To paste the display parameters into a different measurement display, put the cursor in
that display and left-click the mouse while holding the Ctrl key.
Printing the main screen can easily be performed. To open the Print Annotation dialog box,
double left-click any shaded part of the measurement display area. See
page 107.
10
49.
14.
"File > Print..." on
on page 11.
Chapter 2