Setting Up Delta Displays; Setting Marker Properties - Agilent Technologies N4413A User Manual

Setting Up Delta Displays

Right-click any marker to make it the reference marker and to set up delta displays. Other
defined markers turn gray and show the values relative to the reference marker.
You can also right-drag on the display to show the value under the pointer as a delta value
from the reference (active) marker.

Setting Marker Properties

Right click the right edge of the Markers window to open the markers properties box on Polar
or Smith Charts.
SELECT:
Display All Markers
Display Active Marker
Mag + Angle
dB + Angle
Real + Imag
Impedance
Admittance
Chapter 3
TO:
Show all set markers on display.
Restrict marker display to the active marker.
Show the magnitude and angle of the reflection coefficient.
Show the log magnitude and angle of the reflection coefficient.
Show the real and imaginary parts of the reflection coefficient.
Show the real and imaginary parts of the impedance.
Show the real and imaginary parts of the admittance.
Using the Multiport Test System
How to Use Markers
53