Supported Equipment - Agilent Technologies N4413A User Manual

About the Multiport Test System

Supported Equipment

Supported Equipment
Refer to the following lists for information about equipment used with the multiport test
system.
Network Analyzer:
• Refer to "Multiport Test System Configurations" on page
System Controller:
1
• Pentium PC compatible computer (or better)
• Windows 95/98
Windows should be run with the latest service pack available.
• At least 64 megabytes of RAM (>128 MB RAM recommended)
• CD-ROM Drive
• Supported GPIB card
— Agilent 82340, 82341, or 82350 - or - National Instruments (any)
• 1024 x 768 video in at least 256 colors with small fonts.
S/O/L/T Calibration Kits:
• Agilent N4430A Electronic Multiport Calibration Module (6 GHz)
• Agilent N4430B Electronic Multiport Calibration Module (9 GHz)
• Agilent 85032B/E (Type-N) (dc − 6 GHz)
• Agilent 85033D (3.5 mm) (dc − 6 GHz)
• Agilent 85050B/C (7 mm) (dc − 18 GHz)
• Agilent 85052D (3.5 mm) (dc − 26.5 GHz)
• Agilent 85056A (2.4 mm) (dc − 50 GHz)
Additional calibration kits, including on-wafer standards, may be added by the user. Refer
to "How to Add a Calibration Kit Definition" on page
1. Pentium® is a U.S. registered trademark of Intel Corporation.
2. Windows® and MS Windows® are U.S. registered trademarks of Microsoft Corporation.
3. Windows NT® is a U.S. registered trademark of Microsoft Corporation.
6
2 3
, Windows NT , or Windows 2000 (Windows 2000 recommended).
3.
78.
Chapter 1