Agilent Technologies N4413A User Manual page 195

ID Front Panel
Number Feature
6 PORT 4
7 COUPLER
8 R OUT
9 SWITCH
10 IN
11 R IN
12 OUT
13 AUXILIARY
14 OUT
15 IN
Chapter 7
Feature Description
APC-3.5 (m) connector with 20 mm nut that is connected to
the DUT or fixture. (+17 dBm maximum operating level)
SMA (f) connector that is connected to the network analyzer
PORT 2 BIAS TEE connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
R CHANNEL OUT connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
PORT 2 SWITCH connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
B IN connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
R CHANNEL IN connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
B OUT connector using a semirigid cable.
15-pin ribbon (f) connector that may be connected to the
Agilent N4430A/B ECal module to provide ECal capability.
SMA (f) connector that is connected to the network analyzer
A OUT connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
A IN connector using a semirigid cable.
Instrument Information
Front and Rear Panels
185