Agilent Technologies N4413A User Manual page 183

ID Front Panel
Number Feature
7 SWITCH
8 R IN
9 R OUT
10 POWER
11 B OUT
12 B IN
13 AUXILIARY
14 A IN
15 A OUT
Chapter 7
Feature Description
SMA (f) connector that is connected to the network analyzer
PORT 2 SWITCH connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
R Channel IN connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
R Channel OUT connector using a semirigid cable.
ON/OFF switch that disconnects the mains circuits from the
mains supply before other parts of the test set. The front
panel POWER switch disconnects the mains circuits from the
mains supply after the EMC filters and before other parts of
the instrument.
SMA (f) connector that is connected to the network analyzer
B OUT connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
B IN connector using a semirigid cable.
15-pin ribbon (f) connector that may be connected to the
Agilent N4430A/B ECal module to provide ECal capability.
SMA (f) connector that is connected to the network analyzer
A IN connector using a semirigid cable.
SMA (f) connector that is connected to the network analyzer
A OUT connector using a semirigid cable.
Instrument Information
Front and Rear Panels
173