Instrument Markings - Agilent Technologies N4413A User Manual

Safety and Regulatory Information
Safety Information

Instrument Markings

Familiarize yourself with each of the markings and its meaning before operating the
multiport test system.
ICES / NMB-001
202
The ON symbol. The ON symbol is used to mark the positions of the
instrument line switch.
The OFF symbol. The OFF symbol is used to mark the positions of the
instrument line switch.
The ON symbol. The ON symbol is used to mark the positions of the
instrument line switch.
The OFF symbol. The OFF symbol is used to mark the positions of the
instrument line switch.
The AC symbol. The AC symbol is used to indicate the required nature
of the line module input power.
The instruction documentation symbol. The product is marked with
this symbol when it is necessary for the user to refer to the instructions
in the documentation.
The CE mark is a registered trademark of the European Community.
(If accompanied by a year, it is when the design was proven.)
The CSA mark is a registered trademark of the Canadian Standards
Association.
This is a symbol of an Industrial Scientific and Medical Group 1 Class
A product.
This is a marking to indicate product compliance with the Canadian
Interference-Causing Equipment Standard (ICES-001).
The C-Tick mark is a registered trademark of the Australian Spectrum
Management Agency.
Chapter 8