Setup > Hardware - Agilent Technologies N4413A User Manual

Menu Reference
Setup Menu
Setup > Hardware...
Pull down Setup > Hardware... to open the Hardware Configuration dialog box to configure
the system.
Select the Analyzer Model and the Test-Set Model from the drop-down lists.
Enter the Analyzer Address and the Test-Set Address (GPIB addresses).
The GPIB INTERFACE area shows the current status of the interface.
Click OK to accept any changes and exit the dialog box.
Click Cancel to ignore any changes and exit the dialog box.
Click Configure... to open the GPIB Detection and Configuration dialog box and
automatically configure GPIB communication on your host computer.
124 Chapter 5