Safety and Regulatory Information
General Information
General Information
Refer to the information in this section before cleaning your multiport test set or before
returning your multiport test set to Agilent Technologies for service.
Cleaning
When cleaning the test set, using a dry or damp cloth only.
To prevent electrical shock, disconnect the Agilent Technologies
WARNING
N441x series (N4413A, N4414A, N4415A, N4416A, N4417A, N4418A,
N4419A, and N4421A) multiport test set from mains before cleaning.
Use a dry cloth or one slightly dampened with water to clean the
external case parts. Do not attempt to clean internally.
Positioning the System for Use
When setting up the multiport test system for use, position the equipment so that the front
panel power switch is easy to reach.
Shipment for Service
Before shipping equipment for service, contact Agilent for instructions. See
Agilent" on page 160
Ship the test set using the original or comparable packaging materials.
200
for details.
"Contacting
Chapter 8