Toyota TERCEL 1985 Repair Manual page 84

ENGINE MECHANICAL - Cylinder Block
(e) Check that the crankshaft turns smoothly.
(f) Check the connecting rod thrust clearance.
(See page EM-40)
INSTALL REAR OIL SEAL RETAINER
Touque the six bolts.
Torque:
POST ASSEMBLY
1. INSTALL OIL PUMP, STRAINER AND OIL PAN
(See steps 1 to 4 on pages LU-7 and 8)
2. INSTALL WATER PUMP
(See steps 1 to 3 on pages CO-9)
3. INSTALL CYLINDER HEAD
(See steps 1 to 3 on pages EM-31)
4. INSTALL TIMING BELT (See page EM-11)
5. INSTALL HA (See page IG-13)
6. INSTALL SPARK PLUGS (See page EM-34)
7. INSTALL ALTERNATOR AND BRACKET
8. REMOVE ENGINE STAND
9. INSTALL REAR END PLATE
10. ( w / M / T )
INSTALL FLYWHEEL
Torque:
1 1 . ( w / A / T )
INSTALL DRIVE PLATE
Torque:
12. ( w / M / T )
INSTALL CLUTCH DISC AND CLUTCH COVER
(See page CL-12)
NOTE:
installation (See page CL-9).
95 kg-cm (82 ¡n.-lb, 9.3 N m )
800 kg-cm (58 ft-lb, 78 N m )
6 5 0 kg-cm (47 ft-lb, 64 N m )
If necessary, inspect the clutch unit before
EM-53