Toyota TERCEL 1985 Repair Manual page 243

ST-16
Bearing
Clutch Assembly
STARTING SYSTEM — Reduction Type Starter
3. INSERT STEEL BALL INTO CLUTCH SHAFT HOLE
Apply grease to the ball and spring and insert them into
the clutch shaft hole.
4. INSTALL GEAR AND CLUTCH ASSEMBLY
(a)
(b)
5. INSTALL STARTER HOUSING
Place the starter housing on the magnetic switch and
install the two screws.
6. INSTALL FIELD FRAME AND ARMATURE ASSEMBLY
IN MAGNETIC SWITCH
(a) Match the protrusion of the f ield f rame with the mag-
(b)
(c)
Apply grease to gear and the clutch assembly.
Place the clutch assembly, idler gear and bearing in
the starter housing.
netic switch.
Install the two through bolts.
Connect the coil lead to the terminal on the magnetic
switch.