FU-34
2 - 7 mm (0.08 - 0.28 in.)
Pipe
í
0 - 3 mm (0 - 0.12 in.)
FUEL SYSTEM - Fuel Tank and Lines
PRECAUTIONS
1.
Always use new gaskets when replacing the fuel tank
or component parts.
2.
When re-installing, be sure to include the rubber pro-
tectors on the upper surfaces of the fuel tank and tank
band.
3.
Apply the proper torque to all tightening parts.
INSPECT FUEL LINES AND CONNECTIONS
(a)
Inspect the fuel lines and connections for cracks,
leakage or deformation.
(b)
Inspect the fuel tank vapor vent system hoses and
connections for looseness, sharp bends or damage.
(c)
Inspect the fuel tank for deformation, cracks, fuel
leakage or tank band looseness.
(d)
Inspect the filler neck for damage or fuel leakage.
(e)
Hose and tube connections are as shown in the
illustration.
Hose
If problem is found, repair or replace parts as necessary.
FU0041