Toyota TERCEL 1985 Repair Manual page 193

Heater
Outlet Hose
Heater Outlet Pipe
Mount Bolt
COOLING SYSTEM - Water Pump
INSTALLATION OF WATER PUMP
1. INSTALL WATER PUMP
(a) Instali the heater outlet pipe together with a new
gasket to the water pump with the two nuts.
(b) Instali a new O-ring to the block and instali the pump
with the three bolts.
Torque the bolts.
Torque:
2. INSTALL OIL LEVEL GAUGE GUIDE AND GAUGE
(a) Instali a new 0-ring on the oil level gauge guide.
(b) Push in the oil level gauge guide with the O-ring
coated with a small amount of engine oil.
(c) Instad mount bolt.
3. INSTALL HEATER OUTLET PIPE MOUNT BOLT
4. CONNECT HEATER OUTLET HOSE TO OUTLET PIPE
5. INSTALL T1MING BELT UPPER COVER
6. INSTALL THERMOSTAT AND WATER INLET
HOUSING
Instali the thermostat, a new gasket and the water inlet
housing with the two nuts.
7.
INSTALL WATER OUTLET HOUSING AND BY-PASS
PIPE
(a) Instali two new O-rings on the by-pass pipe.
(b) Apply a little engine oil to the O-rings.
(c) Instali the by-pass pipe to the water outlet housing.
150 kg-cm (11 f t - l b , 15 N m )
CO-9