Toyota TERCEL 1985 Repair Manual page 157

FUEL SYSTEM - Carburetor
REMOVAL OF CARBURETOR
PCV Hose
1.
1 TT FU0387
2.
3.
4.
5.
6.
REMOVE AIR CLEAÑER ASSEMBLY
(a) Disconnect the air intake hoses.
(b) Disconnect the emission control following hoses
from the air cleaner:
(1) HAI hose
(2) (Calf. and Canadá 3A-C)
ASV hose
(3) (ex. Fed.)
AS hose
(4) PCV hose
(c) Remove the two mount bolts and batterfly nut.
(d) Lift the air cleaner assembly and disconnect the HIC
hose. Remove the air cleaner assembly.
DISCONNECT ACCELERATOR CABLE FROM
CARBURETOR
(w/ A/T)
DISCONNECT THROTTLE LINKAGE FROM
CARBURETOR
DISCONNECT CARBURETOR CONNECTOR
DISCONNECT FOLLOWING HOSES FROM
CARBURETOR
(a) Emission control hoses
NOTE: Before disconnecting the vacuum hoses, use tags
to indentify how they should be reconnected.
(b) Fuel inlet hose
REMOVE CARBURETOR
(a) Remove the carburetor mount nuts.
(b) Disconnect the EGR vacuum modulator hose (1).
(c) Remove the cold mixture heater wire clamp and lift
off the EGR vacuum modulator bracket.
(d) Lift out the carburetor.
(e) Cover the inlet hole of the intake manifold with a
shop cloth.
FU-7