Toyota TERCEL 1985 Repair Manual page 320

Front
Snap Ring Groove
Front
Snap Ring Groove
MANUAL TRANSAXLE — Manual Transmission
(c)
SST 0 9 5 1 5 - 2 0 0 1 0
SST
ZM0088 ZM0240
(d)
(Z54F)
(a)
(b)
SST 0 9 9 5 0 - 0 0 0 2 0
(c)
(d)
SST 0 9 6 0 8 - 2 0 0 1 1
ZM0088 ZM0094
Using SST and a press, press in a new bearing.
Select a snap ring that will allow minimum axial play
and install it on the shaft.
Snap ring thickness
1.80 - 1.85 (0.0709 - 0.0728)
1.95 - 2.00 (0.0768 - 0.0787)
Using two screwdrivers and a hammer, tap out the
two snap rings.
Using SST and a press, press out the bearing.
Using a plastic-faced hammer, tap in the front snap
ring.
Using SST and a press, press in a new bearing.
MT-39
mm (in.)