Toyota TERCEL 1985 Repair Manual page 310

MANUAL TRANSAXLE — Manual Transmission
(f)
(g) Remove the reverse shift fork. No. 1 shift fork and
(h)
2 1 . (Z45, 46)
REMOVE COUNTER GEAR PLATE
Remove the bolt and gear píate.
NOTE: Mesh the gears and lock the counter gear.
22. (Z53, 54F)
CHECK COUNTER FIFTH GEAR THRUST
CLEARANCE
Using a feeler gauge, measure the counter 5th gear thrust
clearance and record the result for later reference.
Standard clearance:
Máximum clearance:
23. (Z53, 54F)
REMOVE NO. 3 CLUTCH HUB ASSEMBLY AND
COUNTER FIFTH GEAR
(a)
(b)
Remove the No. 2 shift fork and No. 2 shift fork
shaft.
No. 1 shift fork shaft.
Remove the three interlock pin from the No. 2 shift
fork shaft and intermedíate píate.
0.150 - 0.325 mm
( 0 . 0 0 5 9 - 0 . 0 1 2 8 in.)
0.40 mm (0.0157 in.)
Using a screwdriver, pry out the snap ring.
Remove the shifting key retainer.
MT-29