MT-4
MANUAL TRANSAXLE - Manual Transaxle (FWD)
10. DISCONNECT BACKUP LIGHT SWITCH
CONNECTOR
1 1 . DISCONNECT SPEEDOMETER CABLE
12. REMOVE RIGHT STIFFENER PLATE
13. REMOVE TRANSAXLE LOWER MOUNT BOLTS
14. REMOVE REAR SUPPORT MEMBER
(a)
15. REMOVE TRANSAXLE
Draw out the transaxle down toward the rear.
Put a wooden block between the engine and dash
panel because the HA will make contact with the
brake booster when the rear support member is
removed.
(b)
Support the transaxle with a jack.
(c)
Remove the four bolts and rear support member.