FU-22
Relief Lever
FUEL SYSTEM - Carburetor
(b)
Adjust by bending the unloader lever.
(3A-C)
7.
CHECK AND ADJUST CHOKE OPENER
(a)
Set the fast idle cam.
While holding the throttie slightiy open, push the
choke valve closed, and hold it closed as you reléase
the throttie valve.
(b) Apply vacuum to choke breaker diaphragm.
(c)
Check the choke valve angle.
Standard angle: 77° from horizontal
FU0077
(d)
Adjust by bending the relief lever.
8.
CHECK CHOKE BREAKER
NOTE: Fully cióse the choke valve and check the open-
ing angle.