Toyota TERCEL 1985 Repair Manual page 5

Photograph or illustration:
what to do and where
INTRODUCTION - How To Use This Manual
The procedures are presented in a step-by-step format:
• The photo or illustration shows what to do and whereto do
it.
• The task heading tells what to do.
• The detailed text tells how to perform the task and gives
other information such as speciÍFications and warnings.
Example:
CONNECT PROPELLER SHAFT FLANGE TO
COMPANION FLANGE ON DIFFEREIMTIAL
(a)
(b)
Torque:
This format enables the experienced technician to have a FAST
TRACK. He can read the task headings and only refer to the
detailed text when he needs it. Important specifications and
warnings always stand out in bold type.
REFERENCES
References have been kept to a mínimum. However, when they
are required you are given the page to go to.
SPECIFICATIONS
Specifications are presented in bold type throughout the text in
the applicable step. You never have to leave the procedure to
look up your specs.
WARNINGS, CAUTIONS, NOTES:
• WARNINGS are presented in bold type, and indícate there is
a possibility of injury to you or other people.
• CAUTIONS are also presented in bold type, and indícate the
possibility of damage to the components being repaired.
• NOTES are separated from the text but do not appear in
bold. They provide additional information to help you effi-
ciently perform the repair.
/Task heading: what to do
Align the marks on the flanges and connect the them
with the four bolts and nuts. „ ^ ^
Torque the nuts.
^
4 3 0 kg-cm {31 ft-lb, 42 N m )
IN-3
n t i H t
. . . ..
how to do it
Specification