Toyota TERCEL 1985 Repair Manual page 66

ENGINE MECHANICAL - Cylinder Head
19. CONNECT FOLLOWING HOSES:
(a) Heater inlet hose to cylinder head rear píate
(b) Brake booster hose
(c) Fuel hoses to fuel pump
(d) (w/ A/C)
Vacuum hose of VSV for idle-up
(e) Emission control hoses (See system layout in the
emission control section or the layout printed under
the hood) (See pages EC-3 to 6)
20. INSTALL AIR CLEANER ASSEMBLY
(See page FU-24)
2 1 . INSTALL DRIVE BELT
22. CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
23. FILL WITH ENGINE COOLANT (See page CO-3)
24. FILL WITH ENGINE OIL (See page LU-3)
25. START ENGINE AND CHECK FOR LEAKS
26. ADJUST DRIVE BELT (See page EM-13)
27. PERFORM ENGINE ADJUSTMENT
(a) Retighten the cylinder head bolts. (See page EM-31)
Torque:
(b) Readjust the valve clearance. (See page EM-33)
Valve clearance (hot):
Intake
Exhaust
(c) Adjust the ignition timing. (See page IG-13)
(d) Adjust the idle speed. (See page FU-25)
28. ROADTEST
Perform a road test.
29. RECHECK COOLANT AND ENGINE OIL LEVEL
6 0 0 kg-cm (43 ft-lb, 59 N-m)
0.20 mm (0.008 in.)
0.30 mm (0.012 in.)
EM-35