Toyota TERCEL 1985 Repair Manual page 190

CO-6
COOLING SYSTEM - Water Pump
DISASSEMBLY OF WATER PUMP
(See page CO-4)
1. REMOVE WATER PUMP SUCTION COVER
Using a screwdriver, pry off the water pump suction cover.
2. REMOVE PULLEY SEAT
Usíng a press and SST, remove the pulley seat from the
water pump bearing shaft.
SST 09236-00101
3. REMOVE WATER PUMP BEARING
(a) Gradually heat the water pump body to about 85°C
(185°F).
(b) Using a press and SST, remove the water pump
bearing with the rotor from the water pump body.
SST 09236-00101
4. REMOVE ROTOR
(a) Using a press and SST, remove the rotor from the
water pump bearing.
SST 09236-00101
(b) Remove the seal set from the water pump bearing.