Toyota TERCEL 1985 Repair Manual page 147

EMISSION CONTROL SYSTEMS - Auxiliary Systems
Solenoid Valve
O-Ring
INSPECTION OF SYSTEM
CHECK SYSTEM OPERATION
(a) Start the engine.
(b) Disconnect the vacuum hose from the vacuum
switch and plug the hose end.
(c) Check that you can feel a "click" from the 2nd fuel
cut solenoid valve when the vacuum hose is con-
nected and disconnected at idle.
(d) Stop the engine and reconnect the hose.
IF NO PROBLEM IS FOUND WITH THIS INSPECTION, THE
SYSTEM IS OKAY; OTHERWISE INSPECT EACH PART
INSPECTION OF SECOND FUEL CUT
SOLENOID VALVE
(a) Remove the solenoid valve.
(b) Connect two termináis and the battery termináis as
shown.
(c) Check that you can feel the "click" from the solenoid
valve when the battery is connected and discon-
nected.
(d) Check the O-ring for damage.
(e) Reinstall the valve and reconnect the wiring connec-
tor.
INSPECTION OF VACUUM SWITCH (A)
(See page EC-34)
EC-59