STARTING SYSTEM — Reduction Type Starter
REDUCTION TYPE STARTER
COMPONENTS
REMOVAL OF REDUCTION TYPE STARTER
(See procedure on page ST-3)
DISASSEMBLY OF REDUCTION TYPE
STARTER
1.
REMOVE FIELD FRAME AND ARMATURE ASSEMBLY
FROM MAGNETIC SWITCH
(a)
(b)
REMOVE STARTER HOUSING FROM MAGNETIC
SWITCH ASSEMBLY
Remove the two screws and starter housing together with
the idler gear and clutch assembly.
Disconnect the lead wire from the magnetic switch
terminal.
Remove the two through bolts. Pulí out the field
frame together with the armature from the magnetic
switch.
ST-11