Toyota TERCEL 1985 Repair Manual page 208

LUBRICATION SYSTEM - Replacement of Engine Oil and Oil Filter
REPLACEMENT OF ENGINE OIL
AND OIL FILTER
1. DRAIN ENGINE OIL
(a) Remove the oil filler cap.
(b) Remove the oil drain plug and drain the oil into a con-
tainer.
2. REPLACE OIL FILTER
(a) Using SST, remove the oil filter.
SST 0 9 2 2 8 - 2 2 0 2 0
(b) Inspect and clean the oil filter ¡nstallation surface.
(c) Apply clean engine oil to the gasket of a new oil filter.
(d) Lightly screw in the oil filter to where you feel resis-
tance.
(e) Then, using SST, tighten the oil filter an extra 3/4
turn.
SST 0 9 2 2 8 - 2 2 0 2 0
FILL WITH ENGINE OIL
3.
(a) Clean and instali the oil drain plug with a new gasket.
Torque the drain plug.
Torque: 350 kg-cm (25 ft-lb, 34 N m )
(b) Fill the engine with new oil, API grade SF or SF/CC,
multigrade, fuel-efficient and recommened viscosity
oil.
Capacity:
Drain and refill-
w / o Oil filter change
3.0 liters (3.2 US qts, 2.6 Imp.qts)
w/ Oil filter change
3.3 liters (3.5 US qts, 2.9 Imp.qts)
Dry f i l l - 3.7 liters (3.9 US qts, 3.3 Imp.qts)
(c) Instali the oil filler cap.
4.
START ENGINE AND CHECK FOR LEAKS
5.
RECHECK OIL LEVEL
Recheck the engine oil level and refill as necessary.
LU-3