Toyota TERCEL 1985 Repair Manual page 221

IG-8
IGNITION SYSTEM — Integrated Ignition Assembly (HA)
DISASSEMBLY OF HA
(See page IG-7)
1.
2.
3.
4.
5.
7.
8.
REMOVE HA CAP AND ROTOR
REMOVE IGNITER DUST COVER
REMOVE IGNITION COIL DUST COVER
REMOVE IGNITION COIL
(a) Remove the nuts and disconnect the wires from the
termináis of the ignition coil.
(b) Remove the four screws and ignition coil.
REMOVE HA WIRE AND CONDENSER
REMOVE IGNITER
(a) Remove the screws and nuts, and disconnect the
wires from the termináis of the igniter.
(b) Remove the two screws and igniter.
REMOVE SIGNAL ROTOR
Using a screwdriver, pry out the rotor and set spring.
REMOVE VACUUM ADVANCER
(a) Remove the screw.
(b) Disconnect the advancer link hole from the breaker
píate pin and remove the advancer.