Toyota TERCEL 1985 Repair Manual page 61

EM-30
i—i
\ \ mm
%om
<ÍK
n
ENGINE MECHANICAL - Cylinder Head
3.
4.
5.
/ s
T-—•
' EM0059
6.
7.
(k) Secure the camshaft and tighten the HA dríve gear
mount bolt.
Torque: 300 kg-cm (22 ft-lb, 29 N-m)
INSTALL CAMSHAFT TIMING PULLEY
Install the camshaft timing pulley to the camshaft Secure
the camshaft and tighten the camshaft timing pulley bolt
Torque: 4 7 5 kg-cm (34 ft-lb, 47 N-m)
NOTE: Remove any oil or water on the camshaft timing
pulley and keep it clean.
INSTALL ROCKER ARM ASSEMBLY
(a) Install the rocker arm assembly on the cylinder head.
(b) Install and gradually tighten the rocker support bolts
in three passes and in the sequence shown. Torque
the bolts on the final pass.
Torque: 2 5 0 kg-cm (18 ft-lb, 25 N-m)
INSTALL INTAKE AND EXHAUST MANIFOLDS
W I T H VACUUM PIPES
Torque: 2 5 0 kg-cm (18 ft-lb, 25 N-m)
INSTALL FUE.L PUMP
INSTALL CARBURETOR (See page FU-23)