Toyota TERCEL 1985 Repair Manual page 160

FU-10 FUEL SYSTEM - Carburetor
Disassembly of Carburetor Body
(See page FU-6)
1. REMOVE CHOKE OPENER (3A-C) AND THROTTLE
POSITIONER (TP)
(a)
(b)
REMOVE CHECK BALL FOR ACCELERATION
2.
(a)
(b)
REMOVE JETS AND POWER VALVE
3.
(a)
(b)
(c)
(d)
(f)
FU0026 FU0027
DISASSEMBLE AUXÍLIARY ACCELERATION PUMP
4.
(AAP)
(a)
(b)
(c)
Disconnect the opener and TP links.
Remove the two bolts.
Remove the stopper gasket, pump discharge weight,
long spring and discharge large ball.
Using a tweezer, remove the plunger retainer and
small ball.
Remove the slow jet.
Remove the power valve and jet assembly.
Disassemble the power valve and jet.
Remove the TP levers.
Remove the primary
Remove the primary main jet and gasket.
Remove the secondary passage plug and gasket.
Remove the secondary main jet and gasket.
Remove the AAP housing, spring and diaphragm.
Remove the AAP inlet plug and small ball.
Remove the outlet plug, short spring and small ball.
gasket.
passage plug and