5.
Click the [OK] button in the following window and add the module labels of the master/local module.
6.
Set "Required Settings" of "Module Parameter" of the master/local module as shown below.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Required Settings]
7.
Set "Network Configuration Settings" of "Module Parameter" of the master/local module as shown below.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Network
Configuration Settings]
8.
Set "Refresh Setting" of "Module Parameter" of the master/local module as shown below.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Refresh Setting]
APPX
342
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted