Setting In The Master Station - Mitsubishi Electric MELSEC iQ-R Series User Manual

Setting in the master station

Connect the engineering tool to the CPU module of the master station and set parameters.
1.
Create the project with the following settings:
[Project]  [New]
2.
Click the [Setting Change] button to set to use module labels.
3.
Click the [OK] button in the following window and add the module labels of the CPU module.
4.
Add the master/local module with the following settings:
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
341