Mitsubishi Electric MELSEC iQ-R Series User Manual page 330

Start I/O of slave module with inter-module simultaneous temp. rise func. enabled
The start I/O number of the slave modules to which the inter-module simultaneous temperature rise function has been
enabled can be checked.
Check it with the temperature control module where 'Inter-module simultaneous temperature rise function master/slave
selection monitor' (Un\G2172) has been set to Master (1).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
Start I/O of slave module with inter-module simultaneous temperature rise
function enabled
Start I/O of slave module with inter-module simultaneous temperature rise
function enabled (in the Q compatible mode)
Error history
Up to 16 errors that occurred in the module are recorded.
b15
Un\G3600
Un\G3601 First two digits of the year
Un\G3602
Un\G3603
Un\G3604
Millisecond (higher-order digits)
Un\G3605
Un\G3606
Un\G3609
Item
First two digits of the year/last
two digits of the year
Month/day
Hour/minute
Second
Day of the week
Millisecond (upper)
Millisecond (lower)
*1 Value stored when an error occurs at 12:34:56.789 on Monday, June 30, 2014
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
Error history
Error history (in the Q compatible mode)
APPX
328
Appendix 3 Buffer Memory Areas
b8 b7
to
Error code
Last two digits of the year
Month
Hour
Second
Millisecond (lower-order digits)
System area
Stored contents
Stored in BCD code.
One of the following values is stored in BCD code:
Sunday: 0, Monday: 1, Tuesday: 2, Wednesday: 3, Thursday: 4, Friday: 5, and Saturday: 6
Stored in BCD code.
CH1 CH2
2174 to 2236
1354 to 1416
b0
to
Day
Minute
Day of the week
No. 1 to No. 16
3600 to 3759
2000 to 2159
CH3 CH4
*1
Storage example
2014H
630H
1234H
56H
1H
7H
89H