Mitsubishi Electric MELSEC iQ-R Series User Manual page 290

CH1 Alert 3 mode setting
Set the alert mode of Alert 3. For details on the alert function, refer to the following:
Page 72 Alert Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Alert 3 mode setting
CH Alert 3 mode setting (in the Q compatible mode)
This area is disabled for the following modes and channels:
• Heating-cooling control (normal mode), position-proportional control (normal mode): CH3, CH4
• Mix control (normal mode): CH2
■Alert mode and alert set value
Set an alert set value for the alert mode of Alert 3 selected in this setting. Set a value in 'CH1 Alert set value 3' (Un\G436).
'CH1 Alert set value 3' (Un\G436) corresponds to the alert mode of Alert 3.
■Setting range
For the setting range, refer to the following in CH1 Alert 1 mode setting:
Page 286 Setting range
■Enabling the settings
For enabling the settings, refer to the following in CH1 Alert 1 mode setting:
Page 286 Enabling the settings
■Default value
For the default value, refer to the following in CH1 Alert 1 mode setting:
Page 286 Default value
APPX
288
Appendix 3 Buffer Memory Areas
CH1 CH2
535 735
194 210
CH3 CH4
935 1135
226 242