Mitsubishi Electric MELSEC iQ-R Series User Manual page 289

CH1 Alert 2 mode setting
Set the alert mode of Alert 2. For details on the alert function, refer to the following:
Page 72 Alert Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Alert 2 mode setting
CH Alert 2 mode setting (in the Q compatible mode)
This area is disabled for the following modes and channels:
• Heating-cooling control (normal mode), position-proportional control (normal mode): CH3, CH4
• Mix control (normal mode): CH2
■Alert mode and alert set value
An alert set value for the alert mode of Alert 2 selected in this setting can be set. Set a value in 'CH1 Alert set value 2'
(Un\G435). 'CH1 Alert set value 2' (Un\G435) corresponds to the alert mode of Alert 2.
■Setting range
For the setting range, refer to the following in CH1 Alert 1 mode setting:
Page 286 Setting range
■Enabling the settings
For enabling the settings, refer to the following in CH1 Alert 1 mode setting:
Page 286 Enabling the settings
■Default value
For the default value, refer to the following in CH1 Alert 1 mode setting:
Page 286 Default value
CH1 CH2
534 734
193 209
Appendix 3 Buffer Memory Areas
CH3 CH4
934 1134
225 241
APPX
287
A