Mitsubishi Electric MELSEC iQ-R Series User Manual page 313

Temperature control module
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Primary delay digital filter setting
CH Primary delay digital filter setting (in the Q compatible mode)
■Setting range
The setting range is 0 or 1 to 100 (1 to 100s). When 0 is set, the primary delay digital filter processing is not executed.
■Default value
The default value is 0. (The primary delay digital filter processing is disabled.)
CH1 Sensor correction function selection
Select a sensor correction method.
For details on the sensor correction function, refer to the following:
Page 59 Sensor Correction Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Sensor correction function selection
■Setting range
• 0: Normal sensor correction (one-point correction)
• 1: Sensor two-point correction
■Enabling the settings
Turn ON and OFF 'Setting change command' (YB) in the setting mode ('Setting/operation mode status' (X1): OFF) to enable
the settings.
■Default value
The default value is Normal sensor correction (one-point correction) (0H).
Sensor correction function selection [Q compatible mode]
Select a sensor correction method for each channel in the Q compatible mode.
For details on the sensor correction function, refer to the following:
Page 59 Sensor Correction Function
to
to
b15
b12 b11
CH4
CH3
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
Sensor correction function selection (in the Q compatible mode)
■Setting range
• 0: Normal sensor correction (one-point correction)
• 1: Sensor two-point correction
■Enabling the settings
Turn ON and OFF 'Setting change command' (YB) in the setting mode ('Setting/operation mode status' (X1): OFF) to enable
the settings.
■Default value
The default value is Normal sensor correction (one-point correction) (0H).
to
to
b8
b7
b4
b3
CH2
CH1
CH1
CH2
563
763
48
80
CH1
CH2
564
764
b0
CH1
CH2
785
Appendix 3 Buffer Memory Areas
CH3
CH4
963
1163
112
144
CH3
CH4
964
1164
CH3
CH4
APPX
311
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

R60tctrt2tt2R60tcrt4R60tctrt2tt2bwR60tcrt4bw

Table of Contents