Mitsubishi Electric MELSEC iQ-R Series User Manual page 258

Thermocouple type
Input with another analog
module
(0 to 12000)
Input with another analog
module
(0 to 16000)
Input with another analog
module
(0 to 20000)
Input with another analog
module
(0 to 32000)
*1 When the input range is changed, the set values in some buffer memory areas are initialized automatically and return to the default
values.
For the following modes and channels, 'CH1 Input range' (Un\G501) cannot be set to a value of 201 to 205.
When the value is set, an out of setting range error (error code: 1950H) occurs.
• Heating-cooling control (normal mode), position-proportional control (normal mode): CH3, CH4
• Mix control (normal mode): CH2
APPX
256
Appendix 3 Buffer Memory Areas
Temperature Celsius (),
measuring Fahrenheit
range (), digit
0 to 12000 digit
0 to 16000 digit
0 to 20000 digit
0 to 32000 digit
Resolu 'CH1 Input
tion range'
(Un\G501)
1 202
1 203
1 204
1 205
Automatic setting at input range change
'CH1 Upper limit 'CH1 Lower limit
setting limiter' setting limiter'
(Un\G511) (Un\G512)
12000 0
16000 0
20000 0
32000 0
*1