Mitsubishi Electric MELSEC iQ-R Series User Manual page 251

■Setting unit
The value to be set differs depending on the value stored in 'CH1 Decimal point position' (Un\G400). ( Page 229 CH1
Decimal point position)
• No decimal point (0): Set a value in increments of 1 ( or digit).
• First decimal place (1): Set a value (the value multiplied by 10) in increments of 0.1 ().
■Default value
The default value is 0.
CH1 Alert set value 2
According to a selected alert mode of Alert 2, set the temperature at which CH1 Alert 2 (Un\G401, b9) turns ON.
For 'CH1 Alert definition' (Un\G401), refer to the following:
Page 230 CH1 Alert definition
For details on the alert function, refer to the following:
Page 72 Alert Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Alert set value 2
CH Alert set value 2 (in the Q compatible mode)
■Alert mode
Set the alert mode of Alert 2 in the following buffer memory area. The alert mode of Alert 2 corresponds to 'CH1 Alert set
value 2' (Un\G435).
• 'CH1 Alert 2 mode setting' (Un\G534)
■Setting range
For the setting range, refer to the following:
Page 248 Setting range
■Setting unit
For the setting unit, refer to the following:
Page 249 Setting unit
■Default value
The default value is 0.
CH1 Alert set value 3
According to a selected alert mode of Alert 3, set the temperature at which CH1 Alert 3 (Un\G401, b10) turns ON.
For 'CH1 Alert definition' (Un\G401), refer to the following:
Page 230 CH1 Alert definition
For details on the alert function, refer to the following:
Page 72 Alert Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Alert set value 3
CH Alert set value 3 (in the Q compatible mode)
CH1 CH2
435 635
39 71
CH1 CH2
436 636
40 72
Appendix 3 Buffer Memory Areas
CH3 CH4
835 1035
103 135
CH3 CH4
836 1036
104 136
APPX
249
A