Srx Series Services Gateway Interfaces Power And Heat Requirements; Table 12: Pim Power Consumption Values - Juniper SRX Series Manual

Related
Documentation

SRX Series Services Gateway Interfaces Power and Heat Requirements

Copyright © 2015, Juniper Networks, Inc.
Table 11: SRX550 and SRX650 Services Gateway PoE
Specifications (continued)
Power Management
Schemes
Supported slots
Total PoE power sourcing
capacity
Per-port power limit
Power management modes
SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview
on page 8
16-Port Gigabit Ethernet XPIM Overview on page 103
24-Port Gigabit Ethernet XPIM Overview on page 109
Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services
Gateway on page 256
Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module
on the SRX Series Services Gateway on page 258
Table 12 on page 17 shows the power consumption values of each Physical Interface
Module (PIM).

Table 12: PIM Power Consumption Values

PIM Model
1-Port small form-factor pluggable (SFP) Mini-PIM
1-Port Gigabit Ethernet small form-factor pluggable (SFP)
Mini-PIM
ADSL2+ Mini-PIM
Chapter 1: SRX Series Services Gateway Interface Modules Support
Values
PoE is supported on the following front panel slots:
SRX550—Slots 3,4,6,8
SRX650—Slots 2,4,6,8
The 645 W AC and 645 W DC power supplies support the
following capacities:
255 W —PoE on a single power supply, or with redundancy
using the two-power-supply option
510 W —PoE using the two-power-supply option operating
as nonredundant
31.2 W
Static: Power allocation for each interface can be configured.
Class: Power for interfaces is allocated based on the class
of powered device connected.
Power Consumption
(Watts)
4.29
4.4
4.11
17