Connector To Db-15 Connector (Crossover) Pinouts For The 1-Port; Mini-Physical Interface Module; Table 73: Rj-48 Connector To Db-15 Connector (Crossover) Pinouts - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
RJ-48 Connector to DB-15 Connector (Crossover) Pinouts for the 1-Port T1/E1

Mini-Physical Interface Module

Related
Documentation
130
RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts for the 1-Port T1/E1
Mini-Physical Interface Module on page 128
RJ-48 Connector to DB-15 Connector (Crossover) Pinouts for the 1-Port T1/E1
Mini-Physical Interface Module on page 130
1-Port T1/E1 Mini-Physical Interface Module Overview on page 65
Table 73 on page 130 gives RJ-48 connector to DB-15 connector (crossover) pinouts.

Table 73: RJ-48 Connector to DB-15 Connector (Crossover) Pinouts

RJ-48 Pin (on DB-15 Pin (Data Numbering
T1/E1 Mini-PIM) Form)
1 9
2 1
4 11
5 3
3 4
6 2
7 No connect
8 No connect
9 No connect
10 No connect
11 No connect
12 No connect
13 No connect
14 No connect
15 No connect
RJ-48 Connector to RJ-48 Connector (Straight) Pinouts for the 1-Port T1/E1
Mini-Physical Interface Module on page 127
Signal
RX/Ring/– <––>TX/Ring/–
RX/Tip/+ <––>TX/Tip/+
TX/Ring/– <––>RX/Ring/–
TX/Tip/+ <––>RX/Tip/+
Shield/Return/Ground
Shield/Return/Ground
No connect
No connect
No connect
No connect
No connect
No connect
No connect
No connect
No connect
Copyright © 2015, Juniper Networks, Inc.