1-Port Adsl2+ Mini-Physical Interface Module Key Features; Figure 9: Adsl2+ Annex B Mini-Pim Front Panel - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation

1-Port ADSL2+ Mini-Physical Interface Module Key Features

Related
Documentation
46

Figure 9: ADSL2+ Annex B Mini-PIM Front Panel

1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides the following
key features:
Automatic configuration of the ADSL after negotiating with the DSLAM
Support for ADSL, ADSL 2, and ADSL2+ protocols on the same interface card
Dying Gasp support
MLPPP on one interface
Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation
Support of latency modes fast and interleave
Support for ATM AAL5 with CBR, VBR-nrt and UBR traffic types
Support for 10 permanent virtual circuits (PVCS)
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
Copyright © 2015, Juniper Networks, Inc.