CHAPTER 20
ADSL2 + Mini-Physical Interface Module
RJ-11 Connector Pinouts for the 1-Port ADSL2+ Mini-Physical Interface Module
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
RJ-11 Connector Pinouts for the 1-Port ADSL2+ Mini-Physical Interface
Module on page 133
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) uses an RJ-11 cable, which
is not supplied with the Mini-PIM.
Table 74: RJ-11 Connector Pinouts for the 1-Port ADSL2+ Mini-PIM
Pin
1
2
3
4
5
6
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
Table 74 on page 133
Signal
No connect
No connect
RJ P-Tip
RJ N-Ring
No connect
No connect
gives the RJ-11 connector pinouts.
133