1-Port Clear Channel Ds3/E3 Gpim Key Features - Juniper SRX Series Manual

Related
Documentation

1-Port Clear Channel DS3/E3 GPIM Key Features

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Table 42: 1-Port Clear Channel DS3/E3 GPIM Components (continued)
Component
TX and RX coaxial connectors
Captive screws
1-Port Clear Channel DS3/E3 GPIM Overview on page 75
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 78
1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 24
1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 80
1-Port Clear Channel DS3/E3 GPIM Key Features on page 77
1-Port Clear Channel DS3/E3 GPIM LEDs on page 79
1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 80
1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
The 1-Port Clear Channel DS3/E3 Gigabit-Backplane Physical Interface Module (GPIM)
provides the following key features:
Framed and unframed DS3/E3 modes
Line encoding for DS3/E3 modes
Support for Frame Relay, PPP, and HDLC serial encapsulation protocols
External and internal clocking support
Support for DS3/E3 network alarms
Support for chassis clusters
Support for anti-counterfeit check
Loopback (local, remote, and payload) and BERT, PRBS, and QRSS diagnostics support
Support for generation and detection of loopback control codes (line-loopback activate
and deactivate) and FEAC codes
Maximum transmission unit (MTU) size of 4474 bytes (default) and 9192 bytes
(maximum)
1-Port Clear Channel DS3/E3 GPIM Overview on page 75
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 78
Chapter 11: 1-Port Clear Channel DS3/E3 GPIM
Location
Middle/right of the GPIM
One on each side of the GPIM
Description
Dual female 75-ohm BNC
coaxial connectors: TX
(transmit) and RX (receive).
Use the captive screws to hold
the GPIM in place.
77