1-Port Vdsl2 (Annex A) Mini-Physical Interface Module Key Features; Specifications - Juniper SRX Series Manual

Services gateways for the branch physical interface modules reference
Hide thumbs Also See for SRX Series:
Table of Contents

Advertisement

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation

1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features

Related
Documentation
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Hardware Specifications
72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features on page 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs on page 73
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Hardware Specifications on
page 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications on page 141
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration on page 217
The following features are supported on the 1-Port VDSL2 (Annex A) Mini-Physical
Interface Module (Mini-PIM):
ADSL/ADSL2/ADSL2+ backward compatibility with Annex-A, Annex-M support
Packet Mode Transfer (PTM) or Ethernet in the First Mile (EFM) (802.3ah) support
Operation, Administration, and Maintenance (OAM) support for ADSL/ADSL2/ADSL2+
mode
Asynchronous Transfer Mode (ATM) quality of service (QoS) (supported only when
the VDSL2 Mini-PIM is operating in ADSL2 mode)
Multilink Point-to-Point Protocol (MLPPP) (supported only when the VDSL2 Mini-PIM
is operating in ADSL2 mode)
Support for a maximum of 10 permanent virtual connections (PVCs) (only in
ADSL/ADSL2/ADSL2+ mode)
Dying Gasp support (ADSL and VDSL2 mode)
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview on page 71
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs on page 73
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Hardware Specifications on
page 72
MTU Default and Maximum Values for Physical Interface Modules on page 12
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications on page 141
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration on page 217
Table 39 on page 73
gives the hardware specifications of the 1-Port VDSL2 (Annex A)
Mini-Physical Interface Module (Mini-PIM).
Copyright © 2015, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents