2-Port 10-Gigabit Ethernet Xpim Key Features - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation

2-Port 10-Gigabit Ethernet XPIM Key Features

86
Table 46: 2-Port 10- Gigabit Ethernet XPIM SFP+ Transceivers (continued)
Product Number
SFPP-10GE-LR
SFPP-10GE-ER
SFPP-10GE-LRM
Copper Twin-AX 1m
Copper Twin-AX 3m
Copper Twin-AX 5m
Copper Twin-AX 7m
2-Port 10-Gigabit Ethernet XPIM Overview on page 83
2-Port 10-Gigabit Ethernet XPIM Key Features on page 86
2-Port 10-Gigabit Ethernet XPIM Hardware Specifications on page 88
2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
2-Port 10-Gigabit Ethernet XPIM Basic Configuration on page 223
The 2-Port 10-Gigabit Ethernet XPIM supports the following key features:
Contains a total of four ports:
Two SFP+ fiber ports
Two 10 G Base-T copper ports
Only two of the four ports can be active at the same time (one from port group 0 and
one from port group 1). Mixing and matching between the copper and fiber port types
is supported.
Receives SFP+ optics and, at a minimum, supports these SFP+ transceivers:
SFPP-10GE-SR
SFPP-10GE-LR
SFPP-10GE-ER
Interface Type
10GBase-LR Ethernet optical
transceiver SFP, 10 Km reach
10GBase-ER Ethernet optical
transceiver SFP, 40 Km reach
10GBase-LRM Ethernet optical
transceiver SFP, 220 m reach
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
Copyright © 2015, Juniper Networks, Inc.
Connector
LC
LC
LC
Cable connector with 1 m
cable length
Cable connector with 3
m cable length
Cable connector with 5
m cable length
Cable connector with 7
m cable length