8-Port Gigabit Ethernet Sfp Xpim Key Features; 8-Port Gigabit Ethernet Sfp Xpim Hardware Specifications; Table 50: 8-Port Gigabit Ethernet Sfp Xpim Physical Specifications - Juniper SRX Series Manual

8-Port Gigabit Ethernet SFP XPIM Key Features

Related
Documentation

8-Port Gigabit Ethernet SFP XPIM Hardware Specifications

Copyright © 2015, Juniper Networks, Inc.
The 8-Port Gigabit Ethernet small form-factor pluggable XPIM (SFP XPIM) has the
following key features:
8 triple-speed (10/100/1000 Mbps) Ethernet ports, double-high card
PoE not supported
PCI-Express interface for control and management
I2C interface for module monitor and identification
Maximum module power of 40.0 W without PoE
JTAG support for boundary scan test
CAUTION: If you are having a problem running a Juniper Networks device
that is using a third-party optic or cable, the Juniper Networks Technical
Assistance Center (JTAC) can help you diagnose the source of the problem.
Your JTAC engineer might recommend that you check the third-party optic
or cable and potentially replace it with an equivalent Juniper Networks optic
or cable that is qualified for the device.
8-Port Gigabit Ethernet SFP XPIM Overview on page 91
8-Port Gigabit Ethernet SFP XPIM Hardware Specifications on page 93
8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications on page 25
8-Port Gigabit Ethernet SFP XPIM Supported Modules on page 95
8-Port Gigabit Ethernet SFP XPIM LEDs on page 94
8-Port Gigabit Ethernet SFP XPIM Components on page 92
8-Port Gigabit Ethernet SFP XPIM Basic Configuration on page 227
Table 50 on page 93 gives the physical specifications of the 8-Port Gigabit Ethernet small
form-factor pluggable XPIM (SFP XPIM).

Table 50: 8-Port Gigabit Ethernet SFP XPIM Physical Specifications

Description
Dimensions (H x W x L)
Weight
Chapter 13: 8-Port Gigabit Ethernet SFP XPIM
Value
0.78 in. x 6.72 in. x 8.1 in.
(1.98 cm x 17.1 cm x 20.57 cm)
17.6 oz (0.499 kg)
93