1-Port Clear Channel Ds3/E3 Gpim Leds; Table 44: 1-Port Clear Channel Ds3/E3 Gpim Led States - Juniper SRX Series Manual

1-Port Clear Channel DS3/E3 GPIM LEDs

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
The 1-Port Clear Channel DS3/E3 Gigabit-Backplane Physical Interface Module (GPIM)
has the LEDs described in

Table 44: 1-Port Clear Channel DS3/E3 GPIM LED States

LED Color
STATUS Green
Yellow
Red
LOS Yellow
LPBK Yellow
AIS Yellow
RDI Yellow
ALARM Green
Red
OOF Yellow
1-Port Clear Channel DS3/E3 GPIM Overview on page 75
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 78
1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 24
1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 80
1-Port Clear Channel DS3/E3 GPIM Key Features on page 77
1-Port Clear Channel DS3/E3 GPIM Components on page 76
1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 80
1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
Chapter 11: 1-Port Clear Channel DS3/E3 GPIM
Table 44 on page 79.
State
On
On
On
Off
On
On
On
On
On
On
On
Description
GPIM is online and functioning
normally.
GPIM is starting up, running
diagnostics, or shutting down.
GPIM has failed.
GPIM has no power and can be
removed safely.
Loss of signal online.
Loopback is on.
Port is receiving alarm indication
signal (AIS) alarm.
Port is receiving remote defect
indication (RDI) alarm.
There are no alarms or defects.
An alarm or a defect is present.
Out-of-frame (OOF) RX
multi-frame is not aligned.
79