Connector To Rj-48 Connector (Crossover) Pinouts For The 1-Port; Mini-Physical Interface Module; Table 71: Rj-48 Connector To Rj-48 Connector (Crossover) Pinouts - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation
RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts for the 1-Port T1/E1

Mini-Physical Interface Module

Related
Documentation
128
Table 70: RJ-48 Connector to RJ-48 Connector (Straight)
Pinouts (continued)
RJ-48 Pin (on 1-Port RJ-48 Pin (Data
T1/E1 Mini-PIM) Numbering Form)
7 No connect
8 No connect
RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts for the 1-Port T1/E1
Mini-Physical Interface Module on page 128
RJ-48 Connector to DB-15 Connector (Straight) Pinouts for the 1-Port T1/E1
Mini-Physical Interface Module on page 129
RJ-48 Connector to DB-15 Connector (Crossover) Pinouts for the 1-Port T1/E1
Mini-Physical Interface Module on page 130
1-Port T1/E1 Mini-Physical Interface Module Overview on page 65
Table 71 on page 128 gives RJ-48 connector to RJ-48 connector (crossover) pinouts for
the 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM).

Table 71: RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts

RJ-48 Pin (on RJ-48 Pin (Data
T1/E1 Mini-PIM) Numbering Form)
1 4
2 5
4 1
5 2
3 3
6 6
7 No connect
8 No connect
RJ-48 Connector to RJ-48 Connector (Straight) Pinouts for the 1-Port T1/E1
Mini-Physical Interface Module on page 127
Signal
No connect
No connect
Signal
RX/Ring/– <––>TX/Ring/–
RX/Tip/+ <––>TX/Tip/+
TX/Ring/– <––>RX/Ring/–
TX/Tip/+ <––>RX/Tip/+
Shield/Return/Ground
Shield/Return/Ground
No connect
No connect
Copyright © 2015, Juniper Networks, Inc.