Related
Documentation
8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications
Copyright © 2015, Juniper Networks, Inc.
Table 18: 1-Port Clear Channel DS3/E3 GPIM Network Interface
Specifications (continued)
Description
DS3 Mode
Error counters
Incremented during a periodic
1-second polling routine:
HDLC Features
MTU
Default (4474 bytes) or maximum
jumbo (up to 9192 bytes)
Shared flag
Supported
Idle flag/fill (0x7e or
Supported
all ones)
Counters
Runts, giants
1-Port Clear Channel DS3/E3 GPIM Overview on page 75
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 78
1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 80
1-Port Clear Channel DS3/E3 GPIM Key Features on page 77
1-Port Clear Channel DS3/E3 GPIM LEDs on page 79
1-Port Clear Channel DS3/E3 GPIM Components on page 76
1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 80
1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
Table 19 on page 26
gives the network interface specifications of the 8-Port Gigabit
Ethernet small form-factor pluggable XPIM (SFP XPIM).
Chapter 2: Network Interface Specifications
Line Code Violations (LCV)
P-bit Code Violations (PCV)
C-bit Code Violations (CCV)
Line Errored Seconds (LES)
P-bit Errored Seconds (PES)
C-bit Errored Seconds (CES)
Severely Errored Framing
Seconds (SEFS)
P-bit Severely Errored Seconds
(PSES)
C-bit Severely Errored Seconds
(CSES)
Unavailable Seconds (UAS)
E3 Mode
Incremented during a periodic
1-second polling routine:
Frame Alignment Error (FAE)
Bipolar Coding Violations (BCV)
Excessive Zeros (EXZ)
LCV
LES
SEFS
UAS
Default (4474 bytes) or maximum
jumbo (up to 9192 bytes)
Supported
Supported
Runts, giants
25