Table of Contents
Advertisement
Copyright © 2015, Juniper Networks, Inc.
Table 45: 2-Port 10 Gigabit Ethernet XPIM Components (continued)
Component
Two groups of ports labeled 0
and 1, where each group
contains 1 copper port and 1
fiber port.
NOTE:
By default, all ports are
flow control enabled, and
support link speed of 10 G in
full-duplex mode.
The 10 G fiber port does not
support autonegotiation.
Use the fiber ports to connect
various SFP+ transceivers for
fiber cable connections. See
Table 46 on page 85
for
supported SFP+ transceivers.
Captive screws
You can customize the Ethernet interface type by using different SFP+ transceivers.
Table 46 on page 85
shows the available SFP+ transceivers.
CAUTION:
If you are having a problem running a Juniper Networks device
that is using a third-party optic or cable, the Juniper Networks Technical
Assistance Center (JTAC) can help you diagnose the source of the problem.
Your JTAC engineer might recommend that you check the third-party optic
or cable and potentially replace it with an equivalent Juniper Networks optic
or cable that is qualified for the device.
Table 46: 2-Port 10- Gigabit Ethernet XPIM SFP+ Transceivers
Product Number
SFPP-10GE-SR
Chapter 12: 2-Port 10-Gigabit Ethernet XPIM
Location
Middle of the XPIM
One on each side of the XPIM
Interface Type
10GBase-SR Ethernet optical
transceiver SFP, 26 m reach
Description
Copper ports support link
speeds of 10/100/1000
Mbps/10 G in full-duplex
and half-duplex modes.
Fiber ports support link
speeds of 1000 Mbps/10 G
in full-duplex mode.
NOTE:
The 1 G fiber port
configuration is supported
starting with Junos OS
Release 10.2R2.
Copper ports (for 10 G) use
a CAT-6a or CAT-7 cable
connector.
Copper ports support
autonegotiation; whereas
fiber ports do not support
autonegotiation.
NOTE:
The 10 G fiber port
does not support
autonegotiation.
All ports support flow
control and can be
configured in loopback
mode for testing purposes.
Use the captive screws to hold
the XPIM in place.
Connector
LC
85
Hide quick links:
Advertisement
Chapters
Table of Contents
