2-Port 10-Gigabit Ethernet Xpim; 2-Port 10-Gigabit Ethernet Xpim Overview; Figure 17: Srx550 Services Gateway Slot Numbers; Figure 18: Srx650 Services Gateway Slot Numbers - Juniper SRX Series Manual

CHAPTER 12

2-Port 10-Gigabit Ethernet XPIM

2-Port 10-Gigabit Ethernet XPIM Overview

Copyright © 2015, Juniper Networks, Inc.
2-Port 10-Gigabit Ethernet XPIM Overview on page 83
2-Port 10-Gigabit Ethernet XPIM Components on page 84
2-Port 10-Gigabit Ethernet XPIM Key Features on page 86
2-Port 10-Gigabit Ethernet XPIM Hardware Specifications on page 88
2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
The 2-Port 10-Gigabit Ethernet XPIM provides a connection to high-speed Ethernet
networks through branch WAN service and allows carriers to provide multiple levels of
Ethernet service with a single connection option for all service ranges.
The 2-Port 10-Gigabit Ethernet XPIM can be installed only in the following slots, which
provide 20G connectivity to the Services and Routing Engine (SRE) switch:
Slot 6 on the SRX550 Services Gateway. See
Slots 2 and 6 on the SRX650 Services Gateway. See

Figure 17: SRX550 Services Gateway Slot Numbers

1

Figure 18: SRX650 Services Gateway Slot Numbers

650
The 2-Port 10-Gigabit Ethernet XPIM contains two 10-Gigabit Ethernet interfaces with
both copper and small form-factor pluggable plus transceiver (SFP+) terminations, to
support redundancy and enable the services gateway to be used as a pure security service
Figure 17 on page
Figure 18 on page
7
5
2
7
5
3
1
83.
83.
8
6
4
3
8
6
4
2
83