SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards
Related
Documentation
48
Table 30: 1-Port ADSL2+ Mini-PIM LED States
LED
Color
SYNC
Green
TX/RX
Green
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) supports the following
standards:
ANSI T1.413 Issue 2 (Annex A only)
ITU G.992.1 (G.dmt)
ITU G.992.3 (ADSL2)
ITU G.992.5 (ADSL2+)
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
State
Description
On
Indicates that the ADSL interface is trained
Blinking
Indicates training is in progress
Off
Indicates that the interface is idle
Blinking
Indicates that traffic is passing through
Off
Indicates that no traffic is passing through
Copyright © 2015, Juniper Networks, Inc.